18
Kapitel 5: Einrichten des Wireless-G ADSL-Gateways mit SRX200
Verwenden des Setup-Assistenten
Wireless-G ADSL-Gateway mit SRX200
Static IP
(Statische IP-Adresse): Klicken Sie bei Verwendung einer statischen IP-Adresse auf das Optionsfeld
Static IP
(Statische IP-Adresse). Geben Sie geeignete Werte in den Feldern
IP Address
(IP-Adresse),
Subnet
Mask
(Subnetzmaske),
Default Gateway
(Standard-Gateway),
Primary DNS
(Primärer DNS) und
Secondary
DNS
(Sekundärer DNS) ein. (Sie müssen mindestens die IP-Adresse eines DNS-Servers eingeben.)
Klicken Sie auf die Schaltfläche
Next
(Weiter), um fortzufahren, oder auf die Schaltfläche
Back
(Zurück),
um zum vorherigen Fenster zurückzukehren.
1483 Routed (1483-Weiterleitung)
Nach der Auswahl eines Internet-Dienstanbieters werden die Einstellungen für Kapselung, VPI, VCI und
Multiplexing im Setup-Assistenten automatisch vorgenommen. Wählen Sie dann die entsprechenden
IP-Einstellungen für die DSL-Verbindung aus.
In diesem Fenster können Sie die Einstellungen manuell vornehmen.
VPI/VCI
: Wenn Sie die Einstellungen manuell eingeben müssen, tragen Sie hier die von Ihrem Internet-
Dienstanbieter zur Verfügung gestellten Werte für VPI (
Virtual Path Identifier
) und VCI (
Virtual Channel
Identifier
) ein.
Multiplexing
: Wenn Sie die Einstellungen manuell eingeben müssen, wählen Sie je nach ISP
LLC
oder
VC
aus.
Static IP
(Statische IP-Adresse): Geben Sie geeignete Werte in den Feldern
IP Address
(IP-Adresse),
Subnet Mask
(Subnetzmaske),
Default Gateway
(Standard-Gateway),
Primary DNS
(Primärer DNS) und
Secondary DNS
(Sekundärer DNS) ein. (Sie müssen mindestens die IP-Adresse eines DNS-Servers eingeben.)
Klicken Sie auf die Schaltfläche
Next
(Weiter), um fortzufahren, oder auf die Schaltfläche
Back
(Zurück),
um zum vorherigen Fenster zurückzukehren.
Abbildung 5-13: Setup-Assistent – Fenster
Configure
DSL
(Konfigurieren von DSL) – „1483 Routed“
(1483-Weiterleitung)