30
Kapitel 6: Konfigurieren des Wireless-G ADSL-Gateways mit SRX200
Registerkarte „Setup“ (Einrichtung)
Wireless-G ADSL-Gateway mit SRX200
•
Pcr Rate
(PCR-Rate): Wenn
Sie die Übertragungsrate der DSL-Leitung durch 424 dividieren, erhalten Sie
die PCR-Rate. Diese gibt die maximale Rate an, mit der ein Sender Zellen senden kann. Geben Sie die
Rate in diesem Feld ein (sofern dies für den Dienstanbieter erforderlich ist).
•
Scr Rate
(SCR-Rate): Gibt
den Mittelwert der Zellrate an, die übertragen werden kann. Der Wert der SCR-
Rate liegt gewöhnlich unter dem Wert der PCR-Rate. Geben Sie die Rate in diesem Feld ein (sofern dies
für den Dienstanbieter erforderlich ist).
•
Autodetect
(Automatisch erkennen): Wählen Sie
Enable
(Aktivieren) aus, damit die Einstellungen
automatisch eingetragen werden, oder
Disable
(Deaktivieren), um die Werte manuell einzugeben.
•
Virtual Circuit
(Virtuelle Verbindung): Für diese Option sind zwei Einstellungen erforderlich:
VPI
(
Virtual Path Identifier
, Virtueller Pfadidentifizierer) und
VCI
(
Virtual Channel Identifier
, Virtueller
Kanalidentifizierer). Die korrekten Einstellungen erhalten Sie von Ihrem ISP.
•
IP Settings
(IP-Einstellungen): Befolgen Sie die Anweisungen, die im Abschnitt für den jeweils verwendeten
Kapselungstyp aufgeführt sind.
„RFC 1483 Bridged“ (RFC 1483-Überbrückung)
Dynamische IP-Adresse
IP Settings
(IP-Einstellungen): Aktivieren Sie
Obtain an IP Address Automatically
(IP-Adresse automatisch
beziehen), wenn Sie laut Angaben Ihres ISP die Verbindung über eine dynamische IP-Adresse herstellen.
Statische IP-Adresse
Wenn Sie für die Internetverbindung eine permanente (statische) IP-Adresse verwenden, aktivieren Sie
Use
the following IP Address
(Folgende IP-Adresse verwenden).
•
Internet IP Address
(Internet-IP-Adresse): Hierbei handelt es sich um die IP-Adresse des Gateways im
WAN bzw. im Internet. Sie erhalten die hier anzugebene IP-Adresse von Ihrem ISP.
•
Subnet Mask
(Subnetzmaske): Hierbei handelt es sich um die Subnetzmaske des Gateways. Sie erhalten
die Subnetzmaske von Ihrem ISP.
•
Default Gateway
(Standard-Gateway): Sie erhalten die Standard-Gateway-Adresse von Ihrem ISP.
Bei dieser Adresse handelt es sich um die IP-Adresse des ISP-Servers.
•
Primary DNS
(Primärer DNS, erforderlich) und
Secondary DNS
(Sekundärer DNS, optional): Sie erhalten
von Ihrem ISP mindestens eine Server-IP-Adresse für das DNS (
Domain Name System
).
Abbildung 6-3: „RFC 1483 Bridged“
(RFC 1483-Überbrückung)