18
Chapter 5: Setting up the Wireless-G ADSL Gateway with SRX200
Using the Setup Wizard
Wireless-G ADSL Gateway with SRX200
PPPoE
If you selected your ISP, then the Setup Wizard will automatically select the Encapsulation, VPI, VCI, and
Multiplexing settings. Then enter the User ID and Password for your DSL connection.
If you need to manually enter your settings, use this screen.
VPI/VCI
- If you need to manually enter your settings, enter the VPI (Virtual Path Identifier) and VCI (Virtual
Channel Identifier) settings provided by your ISP.
Multiplexing
- If you need to manually enter your settings, select
LLC
or
VC
, depending on your ISP.
User ID
and
Password
- Enter the User ID and Password provided by your ISP.
Connection
- Select
Keep Alive
if you always want to be connected to your ISP, or select
Connect on
Demand
if you are charged for the time that you are connected to your ISP.
Keep Alive
- For this option, the Gateway will keep the Internet connection active. In the
Redial Period
field,
specify how often you want the Gateway to check the Internet connection (the default is
5
minutes).
Connect on Demand
- If you select this option, the Gateway will terminate your Internet access after all
online applications have been closed for a specified period of time, which you can specify in the
Max Idle
Time
field (the default is
30
seconds).
Click the
Next
button to continue or the
Back
button to return to the previous screen.
14. The Gateway provides a Web-based Utility you can use for configuring the Gateway from any networked PC.
Access to the Utility is protected by a password.
Password
- The default password is
admin
. Change it to a password of your choice.
Confirm
- Enter the password again in the
Confirm
field.
Click the
Next
button to continue or the
Back
button to return to the previous screen.
Figure 5-15: Setup Wizard’s Configure DSL -
PPPoE Screen
Figure 5-16: Setup Wizard’s Set the Gateway’s
Password Screen