manualshive.com logo in svg

Cisco Catalyst 2928, Руководство по настройке программного обеспечения

Скачайте бесплатное руководство по настройке программного обеспечения для Cisco Catalyst 2928 на manualshive.com. Этот мануал поможет вам разобраться с функциональностью продукта и оптимизировать его работу. Не упустите возможность загрузить его сейчас, чтобы использовать все возможности вашего оборудования.

Поделиться
Скачать
background image

 

29-7

Catalyst 2928 Switch Software Configuration Guide

OL-23389-01

Chapter 29      Configuring SNMP

Configuring SNMP

SNMP Configuration Guidelines

If the switch starts and the witch startup configuration has at least one 

snmp-server

 global configuration 

command, the SNMP agent is enabled.

An SNMP 

group

 is a table that maps SNMP users to SNMP views. An SNMP 

user

 is a member of an 

SNMP group. An SNMP 

host

 is the recipient of an SNMP trap operation. An SNMP 

engine ID

 is a name 

for the local or remote SNMP engine. 

When configuring SNMP, follow these guidelines:

•

When configuring an SNMP group, do not specify a notify view. The 

snmp-server host

 global 

configuration command autogenerates a notify view for the user and then adds it to the group 
associated with that user. Modifying the group's notify view affects all users associated with that 
group. See the 

Cisco IOS Configuration Fundamentals Command Reference 

for information about 

when you should configure notify views.

•

To configure a remote user, specify the IP address or port number for the remote SNMP agent of the 
device where the user resides. 

•

Before you configure remote users for a particular agent, configure the SNMP engine ID, using the 

snmp-server engineID

 global configuration with the 

remote

 option. The remote agent's SNMP 

engine ID and user password are used to compute the authentication and privacy digests. If you do 
not configure the remote engine ID first, the configuration command fails.

•

When configuring SNMP informs, you need to configure the SNMP engine ID for the remote agent 
in the SNMP database before you can send proxy requests or informs to it.

•

If a local user is not associated with a remote host, the switch does not send informs for the 

auth

 

(authNoPriv) and the 

priv

 (authPriv) authentication levels. 

•

Changing the value of the SNMP engine ID has important side effects. A user's password (entered 
on the command line) is converted to an MD5 or SHA security digest based on the password and the 
local engine ID. The command-line password is then destroyed, as required by RFC 2274. Because 
of this deletion, if the value of the engine ID changes, the security digests of SNMPv3 users become 
invalid, and you need to reconfigure SNMP users by using the 

snmp-server user

 

username

 global 

configuration command. Similar restrictions require the reconfiguration of community strings when 
the engine ID changes. 

Disabling the SNMP Agent

Beginning in privileged EXEC mode, follow these steps to disable the SNMP agent:

The

 no snmp-server

 global configuration command disables all running versions (Version 1, 

Version 2C, and Version 3) on the device. No specific Cisco IOS command exists to enable SNMP. The 
first 

snmp-server

 global configuration command that you enter enables all versions of SNMP.

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

no snmp-server

Disable the SNMP agent operation.

Step 3

end

Return to privileged EXEC mode.

Step 4

show running-config

Verify your entries.

Step 5

copy running-config startup-config

(Optional) Save your entries in the configuration file.

Содержание Catalyst 2928





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 2928

C&H Technologies EM405-8 Manual preview
EM405-8
Бренд: C&H Technologies Страницы: 46
Parkside POF 1200 A1 Operation Manual preview
POF 1200 A1
Бренд: Parkside Страницы: 55
Parkside POF 1200 A1 Operation And Safety Notes preview
POF 1200 A1
Бренд: Parkside Страницы: 34
Grasslin TOWERCHRON DP72 Programming Manual preview
TOWERCHRON DP72
Бренд: Grasslin Страницы: 2
TP-Link TD-8817 Specifications preview
TD-8817
Бренд: TP-Link Страницы: 3
U.S. Products maxg Quick Installation Manual preview
maxg
Бренд: U.S. Products Страницы: 80
HARTING HAIIC MICA Hardware Development Manual preview
HAIIC MICA
Бренд: HARTING Страницы: 13
Extron electronics PoleVault System A/V Source Inputs Specification Sheet preview
PoleVault System A/V Source Inputs
Бренд: Extron electronics Страницы: 4
Juniper EX2500 Quick Start preview
EX2500
Бренд: Juniper Страницы: 2
TVT Digital TD-3316B4-16P-A1 Quick Start Manual preview
TD-3316B4-16P-A1
Бренд: TVT Digital Страницы: 2
CyberTAN WR214C User Manual preview
WR214C
Бренд: CyberTAN Страницы: 67
Trend Micro IPS Pro-Module-24C-GE-BP-TM Quick Setup Manual preview
IPS Pro-Module-24C-GE-BP-TM
Бренд: Trend Micro Страницы: 3
Compro Technology RS-2104 Quick Installation Manual preview
RS-2104
Бренд: Compro Technology Страницы: 2
Korenix JetNet 3705 User Manual preview
JetNet 3705
Бренд: Korenix Страницы: 25
Digisol DG-BG100 User Manual preview
DG-BG100
Бренд: Digisol Страницы: 81
National Instruments PXI PXITM -1000 User Manual preview
PXI PXITM -1000
Бренд: National Instruments Страницы: 55
Extreme Networks ExtremeCloud Appliance E1120 User Manual preview
ExtremeCloud Appliance E1120
Бренд: Extreme Networks Страницы: 219
Dinstar UC8000 IPPBX User Manual preview
UC8000 IPPBX
Бренд: Dinstar Страницы: 103

Бренды по названию

Популярные бренды

Загрузить еще бренды