24-7
Catalyst 2928 Switch Software Configuration Guide
OL-23389-01
Chapter 24 Configuring LLDP and LLDP-MED
Configuring LLDP and LLDP-MED
Use the
no
form of each command to return to the default setting.
This example shows how to configure VLAN 100 for voice application with CoS and to enable the
network-policy profile and network-policy TLV on an interface:
Switch#
configure terminal
Switch(config)#
network-policy 1
Switch(config-network-policy)#
voice vlan 100
cos 4
Switch(config-network-policy)#
exit
Switch(config)#
interface gigabitethernet0/1
Switch(config-if)#
network-policy profile 1
Switch(config-if)#
lldp med-tlv-select network-policy
This example shows how to configure the voice application type for the native VLAN with priority
tagging:
Switch(config-network-policy)#
voice vlan dot1p cos 4
Switch(config-network-policy)#
voice vlan dot1p dscp 34
Step 3
{
voice
|
voice-signaling
}
vlan
[
vlan-id
{
cos
cvalue
|
dscp
dvalue
}] | [[
dot1p
{
cos
cvalue
|
dscp
dvalue
}]
| none
|
untagged
]
Configure the policy attributes:
voice
—Specify the voice application type.
voice-signaling
—Specify the voice-signaling application type.
vlan
—Specify the native VLAN for voice traffic.
vlan-id
—(Optional) Specify the VLAN for voice traffic. The range is 1 to 4094.
cos
cvalue
—(Optional) Specify the Layer 2 priority class of service (CoS) for the
configured VLAN. The range is 0 to 7; the default is 5.
dscp
dvalue
—(Optional) Specify the differentiated services code point (DSCP)
value for the configured VLAN. The range is 0 to 63; the default is 46.
dot1p
—(Optional) Configure the telephone to use IEEE 802.1p priority tagging
and use VLAN 0 (the native VLAN).
none
—(Optional) Do not instruct the IP telephone about the voice VLAN. The
telephone uses the configuration from the telephone key pad.
untagged
—(Optional) Configure the telephone to send untagged voice traffic.
This is the default for the telephone.
Step 4
exit
Return to global configuration mode.
Step 5
interface
interface-id
Specify the interface on which you are configuring a network-policy profile, and
enter interface configuration mode.
Step 6
network-policy
profile number
Specify the network-policy profile number.
Step 7
lldp med-tlv-select
network-policy
Specify the network-policy TLV.
Step 8
end
Return to privileged EXEC mode.
Step 9
show network-policy profile
Verify the configuration.
Step 10
copy running-config
startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Содержание Catalyst 2928
