Cisco BPX 8650, Руководство по установке и настройке

Страница: 390 / 606

23-10
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.30, Part Number 78-12907-01 Rev. E0, May 2005
Chapter 23 Configuring BXM Virtual Switch Interface
Overview: How VSI Works
Figure 23-6 Resource Partitioning Between Automatic Routing Management and VSI
The commands used for multiple partitioning are described in Table 23-3.
Multiple Partition Example
Each logical switch can be seen as a collection of interfaces each with an associated set of resources.
Consider a BPX switch with the following four interfaces:
•
10.1
• 10.2.1
•
11.1
•
11.7.1
Also assume the resource partitioning listed in Table 23-4.
29858
VSI Slave
VSI Resources
AutoRoute
AutoRoute Resources
PNNI Controller
VSI Master
Label Switch Controller
VSI Master
Table 23-3 Commands Used for Multiple Partitioning
Name Description
dspvsipartinfo Displays the information about the current usage of partition resources.
dspchuse Displays a summary of the channel distribution in a given slot.
dspvsiif Displays the Service Class Template assigned to an interface along with a
summary of the resources allocated to each partition.
dspvsich Displays the list and information for the LCNs used for VSI control channels,
including interslave channels and master-slave controllers for all controllers in
all partitions.