Cisco ASR 5000 Series, Обзор продукта

Страница: 682 / 992

Serving GPRS Support Node (SGSN) Overview
▀ Features and Functionality - Basic
▄ Cisco ASR 5000 Series Product Overview
OL-22938-02
HSPA Fallback
Besides enabling configurable support for either 3GPP Release 6 (HSPA) and 3GPP Release 7 (HSPA+) to match
whatever the RNCs support, this feature enables configurable control of data rates on a per RNC basis. This means that
operators can allow subscribers to roam in and out of coverages areas with different QoS levels.
The SGSN can now limit data rates (via QoS) on a per-RNC basis. Some RNCs support HSPA rates (up to 16 Mbps in
the downlink and 8 Mbps in the uplink) and cannot support higher data rates - such as those enabled by HSPA+
(theoretically, up to 256 Mbps both downlink and uplink). Being able to specify the QoS individually for each RNC
makes it possible for operators to allow their subscribers to move in-and-out of coverage areas with different QoS
levels, such as those based on 3GPP Release 6 (HSPA) and 3GPP Release 7 (HSPA+).
For example, when a PDP context established from an RNC with 21 Mbps is handed off to an RNC supporting only 16
Mbps, the end-to-end QoS will be re-negotiated to 16 Mbps. Note that an MS/UE may choose to drop the PDP context
during the QoS renegotiation to a lower value.
This data rate management per RNC functionality is enabled, in the radio network controller (RNC) configuration
mode, by specifying the type of 3GPP release specific compliance, either release 7 for HSPA+ rates or pre-release 7 for
HSPA rates. For configuration details, refer to the
RNC Configuration Mode chapter in the Command Line Interface
Reference .
Local QoS Capping
The operator can configure a cap or limit for the QoS bit rate.
The SGSN can now be configured to cap the QoS bit rate parameter when the subscribed QoS provided by the HLR is
lower than the locally configured value.
Depending upon the keywords included in the command, the SGSN can:
take the QoS parameter configuration from the HLR configuration.
take the QoS parameter configuration from the local settings for use in the APN policy.
during session establishment, apply the lower of either the HLR subscription or the locally configured values.
Refer to the SGSN APN Policy Configuration Mode chapter of the Command Line Interface Reference for the
command.
Tracking Usage of GEA Encryption Algorithms
GPRS encryption algorithm (GEA) significantly affects the SGSN processing capacity based on the GEAx level used -
GEA1, GEA2, or GEA3.
Operators would like to be able to identify the percentages of their customer base that are using the various GEA
encryption algorithms. The same tool can also track the migration trend from GEA2 to GEA3 and allow an operator to
forecast the need for additional SGSN capacity.
New fields and counters have been added to the output generated by the
command. This new information enables the operator to track the number of subscribers capable of
GEA0-GEO3 and to easily see the number of subscribers with negotiated GEAx levels.