Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
8-10
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Auto Line Select
Indicates whether the phone shifts the call focus to incoming calls on
all lines.
DSCP for Call Control
DSCP IP classification for call control signaling.
DSCP for Configuration
DSCP IP classification for any phone configuration transfer.
DSCP for Services
DSCP IP classification for phone-based services.
Security Mode
Displays the security mode that is set for the phone.
Web Access Enabled
Indicates whether web access is enabled (Yes) or disabled (No) for the
phone.
Span to PC Port
Indicates whether the phone will forward packets transmitted and
received on the network port to the access port.
PC VLAN
VLAN used to identify and remove 802.1P/Q tags from packets sent
to the PC.
CDP: PC Port
Indicates whether CDP is supported on the PC port.
CDP: SW Port
Indicates whether CDP is supported on the switch port.
LLDP-MED: SW Port
Indicates whether Link Layer Discovery Protocol Media Endpoint
Discovery (LLDP-MED) is enabled on the switch port.
LLDP: PC Port
Indicates whether Link Layer Discovery Protocol (LLDP) is enabled
on the PC port.
LLDP Power Priority
Advertises the phone’s power priority to the switch, enabling the
switch to appropriately provide power to the phones. Settings include:
•
Unknown—default
•
Low
•
High
•
Critical
LLDP Asset ID
Identifies the asset ID assigned to the phone for inventory
management.
Table 8-2
Network Configuration Area Items (continued)
Item
Description
Содержание 7941G - Unified IP Phone VoIP
Страница 4: ......