Cisco 7941G - Unified IP Phone VoIP Скачать руководство пользователя страница 152

Страница: 152 / 302

Chapter 5 Configuring Features, Templates, Services, and Users

Telephony Features Available for the Cisco Unified IP Phone

5-4

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1

OL-14620-01

Auto-pickup

Allows a user to use one-touch, pickup
functionality for call pickup, group call
pickup, and other group call pickup.

For more information, refer to:

•

Cisco Unified
Communications Manager
Administration Guide

“Pickup Group Configuration”
chapter.

•

Cisco Unified
Communications Manager
System Guide, “

Call Pickup

and Group Call Pickup”
chapter.

Barge

Allows a user to join a non-private call on a
shared phone line. Barge features include
cBarge and Barge.

•

cBarge adds a user to a call and
converts it into a conference, allowing
the user and other parties to access
conference features.

•

Barge adds a user to a call but does not
convert the call into a conference.

The phones support Barge in two
conference modes:

•

Built-in conference bridge at the target
device (the phone that is being barged).
This mode uses the

Barge

softkey.

•

Shared conference bridge. This mode
uses the

cBarge

softkey.

For more information, refer to:

•

Cisco Unified
Communications Manager
Administration Guide, “

Cisco

Unified IP Phone
Configuration” chapter.

•

Cisco Unified
Communications Manager
System Guide, “

Cisco Unified

IP Phones” chapter.

•

Cisco Unified
Communications Manager
Features and Services Guide,
“

Barge and Privacy” chapter.

Block external to
external transfer

Prevents users from transferring an external
call to another external number.

For more information, refer to

Cisco Unified Communications
Manager Features and Services
Guide

, “External Call Transfer

Restrictions” chapter.

Table 5-1

Telephony Features for the Cisco Unified IP Phone (continued)

Feature

Description Configuration

Reference

Содержание 7941G - Unified IP Phone VoIP















































































































































































































































































































Результаты поиска

Содержание 7941G - Unified IP Phone VoIP

Отзывы:

Похожие инструкции для 7941G - Unified IP Phone VoIP

Бренды по названию

Популярные бренды

Cisco 7941G - Unified IP Phone VoIP, Руководство администратора

Результаты поиска

Содержание 7941G - Unified IP Phone VoIP

Отзывы:

Похожие инструкции для 7941G - Unified IP Phone VoIP

Бренды по названию

Популярные бренды