A-15
Cisco 7600 Series Router Installation Guide
OL-4503-26
Appendix A Technical Specifications
Regulatory Standards Compliance
Regulatory Standards Compliance
The Cisco 7600 series routers comply with the regulatory standards listed in the
Regulatory Compliance
and Safety Information for the Cisco 7600 Series Routers
document.
Maximum Torque
36 inch-lb.
Lugs Required
Industry Standard 2-hole compression lug with holes on
5/8- inch centers
6000 W AC
-inp
ut Power Supply
Specification
AC-input type
High-line input with power factor correction (PFC)
included
AC-input voltage rating
Single-phase, 100 to 120 VAC, 200 to 240 VAC (±10% for
full range)
AC-input current rating
16 A each input
Power supply output capacity
•
2900 W maximum (one input active at 220 VAC, or
both inputs active and one input is 110 VAC and the
other is 220 VAC)
•
6000 W maximum (both inputs active at 220 VAC)
AC-input frequency
50/60 Hz (nominal) (±3% for full range)
Power supply output
•
2900 W operation (one 220 VAC source or two
110 VAC sources)
–
25 A @ +3.3 V
–
12 A @ +12 V
–
63.6 A @ +42 V
•
6000 W operation (two 220 VAC sources)
–
25 A @ +3.3 V
–
12 A @ +12 V
–
137.4 A @ +42 V
KVA rating
7.2 KVA (high-line operation)
Output holdup time
•
20 ms minimum
1.
Power factor correction is a standard feature on all Cisco 7600 series AC-input power supplies. PFC reduces the reactive
component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current
components.
Table A-9
Power Supply Specifications (continued)
Item
Specification
