Introduction and Safety
TT Twin-Screw Pump -
Installation, Operation & Maintenance Manual
3
Introduction and Safety
Introduction
Purpose of this manual
The purpose of this manual is to provide necessary information for:
•
Installation
•
Operation
•
Maintenance
CAUTION:
Failure to observe the instructions contained in this manual could result in personal injury and
property damage and may void the warranty. Read this manual carefully before installing and
using the product.
NOTICE:
Save this manual for future reference and keep it readily available.
Requesting other information
Special versions can be supplied with supplementary instruction leaflets. See the sales
contract for any modifications or special version characteristics. For instructions, situations,
or events that are not considered in this manual or in the sales documents, please contact
the nearest CIRCOR representative.
Always specify the exact product type and identification code when requesting technical
information or spare parts.
Safety
WARNING:
•
The operator must be aware of the pumped fluid and take appropriate safety precautions
to prevent physical injury
•
Risk of serious injury or death. If any pressure-containing device is over-pressurized, it
can explode, rupture, or discharge its contents. It is critical to take all necessary measures
to avoid over-pressurization.
•
Risk of death, serious personal injury, and property damage. Installing, operating, or
maintaining the unit using any method not prescribed in this manual is prohibited.
Prohibited methods include any modification to the equipment or use of parts not provided
by CIRCOR. If there is any uncertainty regarding the appropriate use of the equipment,
please contact an CIRCOR representative before proceeding.
•
Risk of serious personal injury. Applying heat to parts with internal cavities or reliefs can
cause trapped liquid to rapidly expand and result in a violent explosion. This manual
clearly identifies accepted methods for disassembling units. These methods must be
adhered to. Never apply heat to aid in part removal unless it is explicitly stated in this
manual.
