EES3 Hardware Interface Description
8.2 Compliance with FCC and IC Rules and Regulations
116
EES3_HD_v01.100b
Page 116 of 118
2009-08-12
Confidential / Released
FCC RF Radiation Exposure Statement
"This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. The antenna used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunc-
tion with any other antenna or transmitter."
IC
"This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de
la classe B est conforme à la norme NMB-003 du Canada."
If the final product is not approved for use in U.S. territories the application manufacturer shall
take care that the 850 MHz and 1900 MHz frequency bands be deactivated and that band set-
tings be inaccessible to end users. If these demands are not met (e.g. if the AT interface is ac-
cessible to end users), it is the responsibility of the application manufacturer to always ensure
that the application be FCC approved regardless of the country it is marketed in. The frequency
bands can be set using the command
AT^SCFG="Radio/Band"[,<rbp>][, <rba>]
A detailed command description can be found in
