32
Plus 42 - 45 - 50 - 55 - 55S - 55E
11-2000
5a5. Engage the drive outlet (PTO) and take it to a speed of at least 500 revs/min
5a6. Complete the filling with water and close the lid of the secondary filler (BS)
5a7. Close the filter’s knob tap (P8)
5a8. Open the three-way tap (P5), setting its lever to position “a”
5b.
FILLING WITH MEDICINAL MIXTURES OR LIQUID PRODUCTS
5b1. Pour the medicinal mixture envisaged for every loading (together with the water possibly used
for the washing of product canisters and of the tools used in the preparation) into the main
filler(BP).
5b2. Close the main filler (BP) of the tank
5b3.Engage the drive outlet (PTO) and take it to a speed of at least 500 revs/min
5b4. Complete the filling with water and close the lid of the secondary filler (BS)
6. Drive to the area to be treated, keeping a rotation speed of the drive outlet (PdP) of at least 500
revs/min. for the whole distance.
FILLING DIRECTLY IN THE TREATMENT AREA
:
7.
Disengage the drive outlet (PTO) and rest the spray atomiser on the ground.
Stop the tractor and remove the key from the control panel.
8. Ensure that the fan is stopped. Engage the fan to the servo amplifier as indicated at point 8.1, then
re-close the mobile protection cover.
Tighten the protection-securing screw properly.
9. Start the tractor.
10. Hoist the machine. Engage the drive outlet (PTO) and, keeping the rotation speed around 500 revs/
min, carry out a further shaking cycle.
CARRY OUT THE TREATMENT.
8.3 - FILLING WITH THE SPECIFIC PIPING
Before utilisation, check the operation and proper sealing of the bottom-drawing
valve by pouring water in the piping.
THE PUMP MUST NEVER RUN DRY.
EXECUTION:
1. Disengage the fan, see point 8.1.a.
2. Close the 2-way distributor:
a. if manual (P10), set the levers in the horizontal position;
b. if electrical, position the latch switches (E10) on “OFF”
3.
Check that:
- P2 is open (lever on “a”);
- P5: is open (lever on “a”);
- P6: is open (work position); NOTE: at first filling of the spray atomiser CHECK that the pressure
regulator is in the OPEN position;
- P7 and P3: are closed (lever on “c”);
- P8: knob tap of the filter is closed.
