12
Plus 42 - 45 - 50 - 55 - 55S - 55E
11-2000
350
300
250
200
150
100
50
50 Plus
2000
2000
4.1 - FRAME
Frames of series Plus 42 and 45
can be coupled to category
“1”
hydraulic hoists.
The plugs diameter is 22 mm. The diameter of the third-point plug is 19 mm.
Frames of series Plus 50, 55, 55S and 55E
can be coupled to category
“2”
hydraulic hoists.
The plugs diameter is 28.5 mm. The diameter of the third-point plug is 25 mm.
In order to limit the shifting of the centre of gravity and to implement a functional
coupling, ALL frames allow for the double positioning of plugs
— The tank-securing bracket is mounted by means of 2 screws on the front, below the 3
rd
point.
— A tie-rod through the tank’s upper tunnel connects the front part of the frame to the rear. This must
be dismantled should the tank be removed and it must be repositioned after having re-assembled
the tank.
This operation is carried out from the front, below the 3
rd
point connection, by means of a spanner
supplied with the machine.
— In the forward part, below the 3
rd
point connection, the removable protection cover of the fan
release device is secured by means of a screw.
The application of a ring onto the frames in order to protect the distribution devices is envisaged. This
must be mounted in the most effective position, according to the operating conditions and in keeping
with the type of heads utilised.
A chain with hooks, fixed to the front part of the frame, allows the support of the transmission joint
when the machine is coupled to the tractor.
All frames are pre-set with axles for the application, on request, of a pair of wheels (please refer to
the installation accessories for the assembly, Paragraph 7.2).
HAND WASHING TANK
(incorporated with the tank)
LEVEL
INDICATOR
GAUGE
PLUNGER
TAP
POWER TAKE-OFF
(PTO)
00133
SECONDARY
FILLER (BS)
CONNECTION
TIE ROD
TANK
DRAINAGE
TAP
MAIN FILLER (BP)
HAND WASHING
TANK TAP
PRESSURE
REGULATOR
MANUAL
DISTRIBUTOR
