background image

9

Plus 42 - 45 - 50 - 55 - 55S - 55E

11-2000

3.5 - HANDLING OF AGRO-CHEMICALS

The 

operator 

could become contaminated due to accidental sprays, contact or inhalation of products

or  crop-dusting  mixtures.
The

  environment

  could  become  polluted  by  mixture  over-spills,  puncturing  of  containers,  uncon-

trolled  storage  of  used  and  unwashed  containers  or  spillage  into  waterworks.
In  order  to  avoid  these  risks  the  preparation  and  filling  operations  must  be  carried  out  in  suitably
appointed and adequately equipped sites.

3.5.1 - Storage

Fixed / stationary

: the site used must be well ventilated and secured by lockable doors in order to

prevent  even  accidental  access  by  children  or  unauthorised  persons.

Mobile

: the carrier equipment must be properly lockable and kept under conditions whereby access

by children or unauthorised persons can be prevented during the absence of the operator. All full or
partially utilised containers must be secured against tipping, falling or breakage during transportation.
Both types of storage must:
— have a suitable container for the storing of empty packaging materials should a specific storage

area not be available;

— have  a  clean  water  supply  readily  available  for  washing,  by  means  of  a  specific  container  or

through  connection  to  the  waterworks  system;

— have the use of fire extinguishers, should flammable products and substances be stored..

- All  packages,  whether  whole  or  partially  utilised,  must  be  stored  in  their  original

packing  and  with  the  warning  instructions  clearly  displayed  and  legible.

- The  storage  indications  must  always  be  scrupulously  adhered  to,  as  well  as  their

utilisation  and  possible  disposal  as  suggested  on  the  product’s  original  packag-
ing.

3.5.2 - Specific equipment

The site at which the preparation and filling out will take place must provide for:
— all the equipment necessary to the precise measuring of both the water quantity and the dose of

product to be mixed in the tank at every filling;

— all the equipment and means useful to the preparation of the mixture and for the cleaning of the

operator in case of contamination;

— all tools necessary to facilitate the direct introduction of the agro-chemicals in the tank;
— the allocation of clothing and specific equipment in order to avoid contamination by contact or

inhalation during the whole operative phase of the intervention;

— the availability of proper equipment able to stop the uncontrolled spilling and flowing of the mixture;
— a  retaining  valve  on  the  feed  pipe  when  the  filling  of  the  tank  takes  place  directly  from  the

waterworks  system.

3.5.3 - Disposal of empty containers and agro-chemicals residues

Agro-chemicals are classified as “special” waste and their disposal must take place separately from
“urban”  wastes.

Содержание Plus 42

































































Отзывы: