Chyron infinit! series, Руководство по эксплуатации

Страница: 657 / 978

iNFiNiT! Family Operation Manual
Revision D 16-5 Mix Effects
The length of time that it takes for an effect to execute is
set in the
Speed: field.
The duration can range from 2 to 300 fields. If a duration
lower than
2
is entered, the
Speed:
field resets to
2.
If a
duration higher than 300 , the Speed: field resets to 300 .
The default setting is
60
.
60 fields = 1 second NTSC or PAL-M
50 fields = 1 second PAL
To set the duration of the transition:
• Place the cursor on the Speed: field, press CLR ,
enter the desired duration in fields using the keypad,
then press
.
6RIW
Soft
specifies the width (in pixels) of the edges that sepa-
rate the image in one buffer from the image in another
buffer.
Soft
is available only to
Wipe
and
Soft Mask
.
Soft can be set from 1 (hard edge) to 60 (soft edge);
default is 20. To set
Soft
:
• Place the cursor on the Soft: field, press CLR , enter a
value from
1
to
60
using the Address Keypad, then
press .
This setting is reflected in the
Soft:
field in the Mix Set-
tings window (§17.5.3) in the Multiple Effects main menu.
5HYHUVH
Reverse: Off
and
Reverse: On
control the direction in
which an effect moves. Reverse is available only to
Wipe
. All Transition Patterns can be controlled by
Reverse . Figure 16-3 illustrates how Reverse works.
The shaded area represents the new image and the direc-
tion the effect is moving.
To set
Reverse
:
[ ] 1. Place the cursor on the Reverse: field.