Chyron infinit! series, Руководство по эксплуатации

Страница: 630 / 978

CHYRON Corporation
Advanced Read FX 15-34 Revision D
(IIHFW7\SH'LVVROYH
Using an EEFB, you may execute Dissolves from mes-
sage to message. When a
Dissolve
is executed, the
Output Percentage level of a message that is in one of the
buffers, for example, the Foreground, rises from
0
to
100
,
as the Output Percentage level of a message that is in the
other buffer (in this example, the Background), simulta-
neously falls from
100 to 0 . What you see is one mes-
sage fading out as another simultaneously fades in.
To execute a
Dissolve
:
[ ] 1. Set Speed (§15.3.1) and Ease (§15.3.3).
Transition Patterns and the Reverse: Off/On
field are not used for this Effect Type.
[ ] 2. Select
Dissolve
in the Effect Type window,
then press .
[ ] 3. Set one of the Output Percentage level sliders
(§15.8.3) to
0
, and the other Output Percentage
level slider to 100 . It does not matter which
buffer is active for
Dissolve
to execute.
[ ] 4. If necessary, press
DO
to clear the Read Next
buffer (§15.6.3). Note that this flips the Output
Percentage level settings. The buffer that was
set to
0 now set to 100 ; and the buffer that was
set to
100
now set to
0
.
[ ] 5. Press
CLR
, then enter the ID number of the
first message using the Address Keypad.
[ ] 6. Press READ NEXT . This message is loaded
into the Read Next buffer.
XXXX read - Read
next buffer ready appears on the Prompt Line,
where
XXXX
designates the type of message
(e.g. Full Page Message ).