Chyron infinit! series, Руководство по эксплуатации

Страница: 457 / 978

iNFiNiT! Family Operation Manual
Revision D 11-3 Clock & Timer Displays
Timer Up Timer Up
counts up from
00:00:00
, or from a time value
you enter using Reset (§11.2.2.2). The default display for-
mat is whatever was last set in the
Format:
field
(§11.2.1.2).
Timer Down Timer Down
is a counts down to
0
from a value entered
using Reset (§11.2.2.2).
• Place the cursor in the Mode: field. Press the SPACE
BAR
or click on the field to toggle through the
choices. Press or move the cursor out of the field.
)RUPDW
Format: Specifies display format of Clock or Timer, i.e. -
hours, minutes, seconds, tenths of a second and hundredths
of a second. The maximum length of the display is:
HH:MM:SS.TH
...where
HH
specifies hours,
MM
specifies minutes,
SS
specifies seconds, T specifies tenths of a second, and H
specifies hundredths of a second.
NOTE
Even if the selected Clock or Timer
format does not display hundredths
of a second, the internal Clock/Timer
counts hundredths of a second, and
is accurate to 0.01 second.
To set
Format
:
• Place the cursor in the Format: field. Press the
SPACE BAR
, then press
CLR
. Type in one of the
formats listed below. Press or move the cursor
out of the field.
HH:MM:SS.TH MM:SS.TH SS.TH HH:MM M:SS
HH:MM:SS.T MM:SS.T SS.T HH H:MM
HH:MM:SS MM:SS SS H:MM:SS H:MM:SS.TH