Chrysler Grand Caravan 2022 Скачать руководство пользователя страница 79

Страница: 79 / 316

GETTING TO KNOW YOUR VEHICLE

NOTE:

Tones are sounded and the turn signals are

flashed with liftgate movements. These alerts can

be turned on or off in Uconnect Settings

page 141.

To Close The Liftgate
The liftgate can also be closed using the Rear

Interior Power Liftgate button (if equipped), located

in the upper left trim in the liftgate opening.

Rear Interior Power Liftgate Switch

To Lock The Vehicle
With a valid Passive Entry key fob within 5 ft

(1.5 m) of the liftgate, pushing the Passive Entry

lock button located to the right of the outside

handle will lock the vehicle.

ARGO

REA

EATURES

Cargo Area Storage

When the third row seats are not in the stowed

position, there is a large area for cargo storage.

Rear Cargo Area

NOTE:

With all rear seats stowed or removed, 4 x 8 ft

(1.2 x 2.4 m) sheets of building material will fit on

the vehicle floor with the liftgate closed. The front

seats must be moved slightly forward of the

rearmost position.

STOW ‘N PLACE ROOF RACK — IF EQUIPPED

The crossbars and side rails are designed to carry

weight on vehicles equipped with a luggage rack.

The load must not exceed 150 lb (68 kg), and

should be uniformly distributed over the luggage

rack crossbars.
The crossbars on your vehicle are delivered stowed

within the roof rack side rails. Crossbars should

always be used whenever cargo is placed on the

roof rack. Check the straps frequently to be sure

that the load remains securely attached.

Roof Rack

1 — Side Rail
2 — Crossbar

22_RUVG_OM_EN_USC_t.book Page 77

Содержание Grand Caravan 2022





























































































































































































































































































































Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды

Chrysler Grand Caravan 2022, Руководство пользователя

Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды