Chrysler Grand Caravan 2022 Скачать руководство пользователя страница 215

Страница: 215 / 316

SAFETY

213

To connect the tether strap hook to the tether

anchorage for either seating position on the 60%

third row seat:
1. Route the tether strap to provide the most

direct path for the strap between the anchor

and the child seat.

2. If the car seat is in the center, raise the center

head restraint and route the tether strap

around the inboard (left) side of the head

restraint support posts, as shown in the

diagram.

3. Attach the tether strap hook of the child

restraint to the top tether anchorage as shown

in the diagram.

4. Remove slack in the tether strap according to

the child restraint manufacturer’s instructions.

Center Tether Attachment – 3rd Row

Outboard Tether Attachments – 3rd Row

SAFETY TIPS

RANSPORTING

ASSENGERS

NEVER TRANSPORT PASSENGERS IN THE CARGO

AREA.

WARNING!

Do not connect the tether strap for more than

one child restraint to the tether anchorage on

the 60% seat in the third row. This anchorage is

intended for one child restraint at a time.

WARNING!



Do not leave children or animals inside parked

vehicles in hot weather. Interior heat build-up

may cause serious injury or death.



It is extremely dangerous to ride in a cargo

area, inside or outside of a vehicle. In a colli

sion, people riding in these areas are more

likely to be seriously injured or killed.



Do not allow people to ride in any area of your

vehicle that is not equipped with seats and

seat belts.



Be sure everyone in your vehicle is in a seat

and using a seat belt properly.

22_RUVG_OM_EN_USC_t.book Page 213

Содержание Grand Caravan 2022





























































































































































































































































































































Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды

Chrysler Grand Caravan 2022, Руководство пользователя

Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды