Chrysler Grand Caravan 2022 Скачать руководство пользователя страница 73

Страница: 73 / 316

GETTING TO KNOW YOUR VEHICLE

The power outlets can be labeled with either a

“key” or a “battery” symbol to indicate how the

outlet is powered. Power outlets labeled with a

“key” are powered when the ignition is in the

ON/RUN or ACC position, while the outlets labeled

with a “battery” are connected directly to the

battery and powered at all times.
NOTE:

All accessories connected to the “battery” powered

outlets should be removed or turned off when the

vehicle is not in use to protect the battery against

discharge.

Your vehicle may be equipped with a front power

outlet located either on the center stack, or at the

bottom of the instrument panel near the storage

tray.

12 Volt Front Power Outlet (Near Storage Tray) -

If Equipped

12 Volt Front Power Outlet (On Center Stack) -

If Equipped

In addition to the front power outlets, there is also

a power outlet located in the rear cargo area.
The rear power outlet is located in the right rear

cargo area.

Rear Power Outlet

NOTE:

The instrument panel power outlet can be changed

to “battery” (powered at all times) by switching the

power outlet fuse in the Power Distribution Center

panel from fuse location F95A to F95B.

CAUTION!

Power outlets are designed for accessory plugs

only. Do not insert any other object in the power

outlets as this will damage the outlet and blow

the fuse. Improper use of the power outlet can

cause damage not covered by your New Vehicle

Limited Warranty.

22_RUVG_OM_EN_USC_t.book Page 71

Содержание Grand Caravan 2022





























































































































































































































































































































Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды

Chrysler Grand Caravan 2022, Руководство пользователя

Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды