Chrysler Grand Caravan 2022 Скачать руководство пользователя страница 97

Страница: 97 / 316

GETTING TO KNOW YOUR INSTRUMENT PANEL

Trip B



Shows the total distance traveled for Trip B

since the last reset.



Shows the Average MPG for Trip B since the last

reset.



Shows the elapsed time traveled for Trip B since

the last reset. Elapsed time will increment when

the ignition switch is in the ON or START posi

tion.

To Reset A Trip Function
Push and hold the OK button to reset the currently

displayed trip.

WARNING LIGHTS AND MESSAGES

The warning/indicator lights will illuminate in the

instrument panel together with a dedicated

message and/or acoustic signal when applicable.

These indications are indicative and precautionary

and as such must not be considered as exhaustive

and/or alternative to the information contained in

the Owner’s Manual, which you are advised to read

carefully in all cases. Always refer to the

information in this chapter in the event of a failure

indication. All active warning/indicator lights will

display first if applicable. The system check menu

may appear different based upon equipment

options and current vehicle status. Some warning/

indicator lights are optional and may not appear.

ARNING

IGHTS

Air Bag Warning Light

This warning light will illuminate to

indicate a fault with the air bag, and will

turn on for four to eight seconds as a bulb

check when the ignition is placed in the

ON/RUN or ACC/ON/RUN position. This light will

illuminate with a single chime when a fault with the

air bag has been detected, it will stay on until the

fault is cleared. If the light is either not on during

startup, stays on, or turns on while driving, have

the system inspected at an authorized dealer as

soon as possible.

Battery Charge Warning Light

This warning light will illuminate when the

battery is not charging properly. If it stays

on while the engine is running, there may

be a malfunction with the charging

system. Contact an authorized dealer as soon as

possible.
This indicates a possible problem with the

electrical system or a related component.

Brake Warning Light

This warning light monitors various brake

functions, including brake fluid level and

parking brake application. If the brake

light turns on it may indicate that the

parking brake is applied, that the brake fluid level

is low, or that there is a problem with the Anti-Lock

Brake System reservoir.
If the light remains on when the parking brake has

been disengaged, and the fluid level is at the full

mark on the master cylinder reservoir, it indicates

a possible brake hydraulic system malfunction or

that a problem with the Brake Booster has been

detected by the Anti-Lock Brake System (ABS) /

Electronic Stability Control (ESC) system. In this

case, the light will remain on until the condition has

been corrected. If the problem is related to the

brake booster, the ABS pump will run when

applying the brake, and a brake pedal pulsation

may be felt during each stop.
The dual brake system provides a reserve braking

capacity in the event of a failure to a portion of the

hydraulic system. A leak in either half of the dual

brake system is indicated by the Brake Warning

Light, which will turn on when the brake fluid level

in the master cylinder has dropped below a

specified level.
The light will remain on until the cause is corrected.
NOTE:

The light may flash momentarily during sharp

cornering maneuvers, which change fluid level

conditions. The vehicle should have service

performed, and the brake fluid level checked.
If brake failure is indicated, immediate repair is

necessary.

22_RUVG_OM_EN_USC_t.book Page 95

Содержание Grand Caravan 2022





























































































































































































































































































































Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды

Chrysler Grand Caravan 2022, Руководство пользователя

Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды