Chrysler Grand Caravan 2022 Скачать руководство пользователя страница 16

Страница: 16 / 316

GETTING TO KNOW YOUR VEHICLE

Programming And Requesting Additional

Key Fobs

Programming the key fob may be performed by an

authorized dealer.
NOTE:



Once a key fob is programmed to a vehicle, it

cannot be repurposed and reprogrammed to

another vehicle.



Only key fobs that are programmed to the

vehicle electronics can be used to start and

operate the vehicle. Once a key fob is

programmed to a vehicle, it cannot be

programmed to any other vehicle.

Duplication of key fobs may be performed at an

authorized dealer. This procedure consists of

programming a blank key fob to the vehicle

electronics. A blank key fob is one that has never

been programmed.
NOTE:



When having the Sentry Key Immobilizer system

serviced, bring all vehicle keys with you to an

authorized dealer.



Keys must be ordered to the correct key cut to

match the vehicle locks.

KeySense Features — If Equipped

This feature provides the vehicle owner with the

ability to customize vehicle settings for the driving

experience for other drivers of the vehicle. The

vehicle settings are protected by a unique

four-digit PIN, which the vehicle owner creates

when accessing the specific settings for the first

time.

KeySense also has additional features that are

always enabled when the specific key is in use that

cannot be set by the vehicle owner. While this

specific key fob is in use, the vehicle will respond

accordingly to the customized vehicle settings and

mandatory features. This includes enhanced

driving assistance features, increased driver

alerts, and the locking of certain optional features.

Settings can be customized within the Uconnect

system

page 141.

KeySense Key Fob

KeySense Unique Splash Screen
At start-up the KeySense splash screen should

inform the driver that the vehicle will be

functioning in KeySense mode when the KeySense

key is in use.

WARNING!



The integrated key fob contains a coin cell

battery. Do not ingest the battery; there is a

chemical burn hazard. If the coin cell battery is

swallowed, it can cause severe internal burns

in just two hours and can lead to death.



If you think a battery may have been swal

lowed or placed inside any part of the body,

seek immediate medical attention.



Keep new and used batteries away from chil

dren. If the battery compartment does not

close securely, stop using the product and

keep it away from children.

WARNING!



Always remove the key fobs from the vehicle

and lock all doors when leaving the vehicle

unattended.



Always place the Keyless Enter ‘n Go™ Ignition

in the OFF position.

22_RUVG_OM_EN_USC_t.book Page 14

Содержание Grand Caravan 2022





























































































































































































































































































































Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды

Chrysler Grand Caravan 2022, Руководство пользователя

Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды