Chrysler Grand Caravan 2022 Скачать руководство пользователя страница 227

Страница: 227 / 316

IN CASE OF EMERGENCY

225

3. Place the wrench on the jack screw and turn

clockwise until the jack head is properly

engaged in the described location. Do not

raise the vehicle until you are sure the jack is

securely engaged.

4. Raise the vehicle by turning the jack screw

clockwise, using the swivel wrench. Raise the

vehicle only until the tire just clears the surface

and enough clearance is obtained to install the

compact spare tire. Minimum tire lift provides

maximum stability.

5. Remove the wheel lug nuts, for vehicles with

wheel covers, remove the cover from the

wheel by hand. Do not pry the wheel cover off.

Then pull the wheel off the hub.

6. Install the inflatable spare on the vehicle,

located in the rear cargo area of the vehicle.

Mounting Inflatable Spare Tire

NOTE:

Do not install the wheel cover on the inflatable

spare tire.
7. Leave the vehicle on the jack and start

inflating the inflatable spare after the tire has

been mounted to the vehicle. Secure the

wheel to the hub by tightening the nuts with

the wrench. After inflation, once the vehicle is

lowered you will have a second opportunity to

“torque” the lug nuts

page 295.

8. Inflate the tire to the prescribed pressure

60 psi (4.2 Bar) using the Portable Air

Compressor

page 227 or Tire Service Kit if

equipped

page 228.

9. Lower the vehicle once the inflatable Spare

has reached its pressure and the

compressor-hose has been removed from the

tire valve.

10. Finish tightening the lug nuts. Push down on

the wrench while at the end of the handle for

increased leverage. Tighten the lug nuts in a

star pattern until each nut has been tightened

twice

page 295. If in doubt about the

correct tightness, have them checked with a

torque wrench by an authorized dealer or at a

service station.

11. Lower the jack to its fully-closed position.

WARNING!

Raising the vehicle higher than necessary can

make the vehicle less stable. It could slip off the

jack and hurt someone near it. Raise the vehicle

only enough to remove the tire.

WARNING!

To avoid the risk of forcing the vehicle off the

jack, do not tighten the wheel nuts fully until the

vehicle has been lowered. Failure to follow this

warning may result in serious injury.

CAUTION!

Be sure to mount the inflatable spare tire with

the valve stem facing outward. The vehicle could

be damaged if the inflatable spare tire is

mounted incorrectly.

22_RUVG_OM_EN_USC_t.book Page 225

Содержание Grand Caravan 2022





























































































































































































































































































































Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды

Chrysler Grand Caravan 2022, Руководство пользователя

Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды