Chrysler Grand Caravan 2022 Скачать руководство пользователя страница 229

Страница: 229 / 316

IN CASE OF EMERGENCY

227

4. Install the remaining lug nuts with the cone

shaped end of the nut toward the wheel.

Lightly tighten all the lug nuts until the wheel

sits flush onto the hub and there is no play. The

nuts will have to be fully tightened once the

vehicle is lowered. Tightening an improperly

seated wheel under vehicle load can damage

the threads, cause vibration, and undermine

safety.

5. Lower the vehicle to the ground by turning the

jack handle counterclockwise.

6. Finish tightening the lug nuts. Push down on

the wrench while at the end of the handle for

increased leverage. Tighten the lug nuts in a

star pattern until each nut has been tightened

twice. Details for proper wheel lug nut torque

page 295. If in doubt about the correct

tightness, have them checked with a torque

wrench by an authorized dealer or at a service

station.

7. After 25 miles (40 km) check the lug nut

torque with a torque wrench to ensure that all

lug nuts are properly seated against the wheel.

ORTABLE

OMPRESSOR

—

QUIPPED

Your vehicle may be equipped with a Portable Air

Compressor. Use the Portable Air Compressor

located in the side compartment of the cargo area

to inflate the inflatable tire to 60 psi (4.2 Bar).

Portable Air Compressor

Portable Air Compressor Usage With Inflatable

Spare Tire
1. Remove the Portable Air Compressor from the

storage location.

2. Raise the vehicle as described in

the Jacking Instructions within this

section.
3. Install the Inflatable Spare tire as

described in the Jack Instructions

section in this manual. Make sure

that the valve stem is located near

the ground, and then screw the air hose of the

Portable Air Compressor to the valve stem.

4. Uncoil the power plug and

connect it the vehicles 12 Volt

power Outlet.
5. Always start the engine before

turning ON the Portable Air

Compressor.
6. Switch the power button ON.

WARNING!

To avoid the risk of forcing the vehicle off the

jack, do not tighten the wheel nuts fully until the

vehicle has been lowered. Failure to follow this

warning may result in serious injury.

1 — Power Plug
2 — Deflation Button
3 — Pressure Gauge
4 — Power Button
5 — Air Hose

22_RUVG_OM_EN_USC_t.book Page 227

Содержание Grand Caravan 2022





























































































































































































































































































































Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды

Chrysler Grand Caravan 2022, Руководство пользователя

Результаты поиска

Содержание Grand Caravan 2022

Отзывы:

Похожие инструкции для Grand Caravan 2022

Бренды по названию

Популярные бренды