Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 55

4. Position the lap belt across your thighs, below your
abdomen. To remove slack in the lap belt portion, pull up
on the shoulder belt. To loosen the lap belt if it is too tight,
tilt the latch plate and pull on the lap belt. A snug belt
reduces the risk of sliding under the belt in a collision.

WARNING!

•

A lap belt worn too high can increase the risk of

internal injury in a collision. The belt forces won’t be
at the strong hip and pelvic bones, but across your
abdomen. Always wear the lap belt as low as pos-
sible and keep it snug.

•

A twisted belt can’t do its job as well. In a collision,

it could even cut into you. Be sure the belt is straight.
If you can’t straighten a belt in your vehicle, take it to
your authorized dealer and have it fixed.

5. Position the shoulder belt on your chest so that it is
comfortable and not resting on your neck. The retractor
will withdraw any slack in the belt.

6. To release the belt, push the red button on the buckle.
The belt will automatically retract to its stowed position.
If necessary, slide the latch plate down the webbing to
allow the belt to retract fully.

Removing Slack from Belt

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

55

«
...
53
54
55
56
57
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов