Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 342 | Manualshive

Страница: 342 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 342

WARNING!

•

Temporary-use spare tires are for emergency use
only. With these tires, do not drive faster than
50 mph (80 km/h).

•

Temporary-use spare tires have limited tread life.
When the tread is worn to the tread wear indica-
tors, the temporary use spare tire needs to be
replaced.

•

Be sure to follow the warnings that apply to your
spare. Failure to do so could result in spare tire
failure and loss of vehicle control.

Do not install a wheel cover or attempt to mount a
conventional tire on the compact spare wheel, since the
wheel is designed specifically for the compact spare.

Do not install more than one compact spare tire/wheel
on the vehicle at any given time.

CAUTION!

Because of the reduced ground clearance, do not take
your vehicle through an automatic car wash with the
compact spare installed. Damage to the vehicle may
result.

Tire Spinning

When stuck in mud, sand, snow, or ice conditions, do not
spin your vehicle’s wheels faster than 30 mph (48 km/h),
or for more than 30 seconds continuously, without stop-
ping.

Refer to “Freeing A Stuck Vehicle” in Section 6 of this
manual for additional information.

342

STARTING AND OPERATING

«
...
340
341
342
343
344
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов