Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 454 | Manualshive

Страница: 454 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 454

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.

2. Disconnect the wire harness from the bulb.

3. Reconnect the wiring harness to the new bulb and
reinstall the bulb by twisting clockwise.

Rear Tail, Stop, Turn Signal, Side Marker and
Backup Lamps

1. Raise the liftgate.

2. Remove the tail lamp assembly by removing the two
screws from the inboard side. Use a fiber stick or similar
tool to gently pry the light on the outboard side to
disengage the two ball studs.

NOTE:

•

If a screwdriver is used, make sure a soft material is
placed between the vehicle body and tool so not to
scratch the paint.

•

The PRY location is best closest to the studs while
dislodging them separately.

Removing Tail Lamp Assembly

454

MAINTAINING YOUR VEHICLE

«
...
452
453
454
455
456
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов