Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 48

The power liftgate may be closed by pressing the button,
located in the upper left trim in the liftgate opening.
Pushing once will only close the liftgate. This button
cannot be used to open the liftgate.

When the RKE transmitter button is pressed and the
Flash Lights feature is enabled, the tail lights will flash to
signal that the liftgate is opening or closing.

WARNING!

During power operation, personal injury or cargo
damage may occur. Ensure the liftgate travel path is
clear. Make sure the liftgate is closed and latched
before driving away.

NOTE:

•

If anything obstructs the power liftgate while it is
closing or opening, the liftgate will automatically
reverse to the closed or open position, provided it
meets sufficient resistance.

Rear Power Liftgate Switch

48

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
46
47
48
49
50
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов