Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 406 | Manualshive

Страница: 406 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 406

CAUTION! (Continued)

•

Do not tow the vehicle from the rear. Damage to
the rear sheet metal, liftgate and fascia will occur.

•

Do not push or tow this vehicle with another
vehicle as damage to the bumper fascia and trans-
mission may result.

•

If the vehicle being towed requires steering, the
ignition switch must be in the ON position, not in
the LOCK or ACC positions.

If it is necessary to use the accessories while being towed
(wipers, defrosters, etc.), the key must be in the ON
position, not the ACC position. Make certain the trans-
mission remains in NEUTRAL.

Towing Without The Ignition Key

Special care must be taken when the vehicle is towed
with the ignition in the OFF position. The only approved
method of towing without the ignition key is with a
flatbed truck. Proper towing equipment is necessary to
prevent damage to the vehicle.

Towing This Vehicle Behind Another Vehicle (Flat
Towing With All Four Wheels On The Ground)

Flat towing of vehicles equipped with an automatic
transmission, is only permitted within the limitations
described in this section.

Towing This Vehicle Behind Another Vehicle With
A Tow Dolly

The manufacturer

does not recommend

that you tow a

front wheel drive vehicle on a tow dolly. Vehicle damage
may occur.

406

WHAT TO DO IN EMERGENCIES

«
...
404
405
406
407
408
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов