Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 455 | Manualshive

Страница: 455 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 455

3. Twist the socket and remove from the lamp assembly.

4. Pull the bulb to remove it from the socket.

5. Replace the bulb, reinstall the socket, and reattach the
lamp assembly.

Center High-Mounted Stop Lamp (CHMSL)

The CHMSL uses LED lamps that are not serviceable
separately. The CHMSL must be replaced as an assembly.
See your authorized dealer.

License Lamp

The license plate lamp is located under the tailgate light
bar and above the license plate.

1. Using a small screwdriver, press inward the locking
tab on the outboard side of the lamp assembly and pull
down on the lamp assembly for removal.

2. Twist and remove the socket from the lamp assembly
and pull the bulb out to remove.

3. Push the bulb into the socket, twist the socket into the
lamp assembly and reinstall the lamp assembly into place
ensuring the locking tab is secure.

1 — Stop, Tail, Turn Signal Bulb Combo

2 — Backup Bulb

7

MAINTAINING YOUR VEHICLE

455

«
...
453
454
455
456
457
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов