Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 34

Settings (Customer-Programmable Features)

⬙

in the

“Electronic Vehicle Information Center (EVIC),” in
Section 4 of this manual.

•

On vehicles not equipped with the optional EVIC
perform the following steps:

1. Enter your vehicle and close all doors.

2. Fasten your seat belt. (Fastening the seat belt will
cancel any chimes that may be confusing during this
programming procedure.)

3. Insert the Key Fob into the ignition switch.

4. Within 15-seconds, cycle the ignition Key Fob from the
LOCK position to the ON/RUN position a minimum of
five times ending in the ON position

(do not start the

engine)

.

5. Within 30 seconds, press the driver’s door lock switch
in the UNLOCK direction.

6. A single chime will sound to indicate the feature has
been changed.

7. To reactivate this feature, repeat the above steps.

8. If a chime is not heard, the program mode was
canceled before the feature could be changed. If neces-
sary, repeat the previous procedure.

The Unlock Doors Automatically On Exit feature can be
reactivated by repeating the above mentioned procedure
or by performing the procedure in the EVIC, Customer-
Programmable Features section on vehicles so equipped.

NOTE:

Use the Lock Doors Automatically at 15 mph

(24 km/h) and Unlock Doors Automatically On Exit
features in accordance with local laws.

34

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
32
33
34
35
36
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов