Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 404 | Manualshive

Страница: 404 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 404

CAUTION!

Any procedure other than above could result in
damage to the charging system of the booster vehicle
or of the immobilized vehicle.

FREEING A STUCK VEHICLE

If your vehicle becomes stuck in mud, sand or snow, it
can often be moved by a rocking motion. Turn your
steering wheel right and left to clear the area around the
front wheels. Then move the shift lever back and forth
between REVERSE and DRIVE. Using minimal accelera-
tor pedal pressure to maintain the rocking motion, with-
out spinning the wheels, is most effective.

CAUTION!

•

When “rocking” a stuck vehicle by moving be-
tween 1st and REVERSE, do not spin the wheels
faster than 15 mph (24 km/h), or drivetrain damage
may result.

•

Revving the engine or spinning the wheels too fast
may lead to transmission overheating and failure.
It can also damage the tires. Do not spin the
wheels above 30 mph (48 km/h).

NOTE:

To improve the vehicle’s traction when starting

off in deep snow, sand or gravel, it may be desirable to
switch the Electronic Stability Control (ESC) to “Partial
Off” mode. For further information on ESC refer to
“Electronic Brake Control System” in Section 5.

404

WHAT TO DO IN EMERGENCIES

«
...
402
403
404
405
406
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов