Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 403 | Manualshive

Страница: 403 / 506

Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 403

5. Connect the other cable, first to the negative terminal
of the booster battery, and then to the engine of the
vehicle with the discharged battery. Make sure there is a
good contact on the engine.

WARNING!

•

Do not connect the cable to the negative post of the
discharged battery. The resulting electrical spark
could cause the battery to explode and could result
in personal injury.

•

During cold weather when temperatures are be-
low the freezing point, electrolyte in a discharged
battery may freeze. Do not attempt jump-starting
because the battery could rupture or explode and
cause personal injury. Battery temperature must be
brought above freezing point before attempting a
jump-start.

6. Start the engine in the vehicle that has the booster
battery. Let the engine idle a few minutes, then start the
engine in the vehicle with the discharged battery.

7. When removing the jumper cables, reverse the above
sequence exactly. Be careful of the moving belts and fan.

WARNING!

Any procedure other than the jump-starting process
listed could result in:

•

Personal injury caused by electrolyte squirting out
the battery vent.

•

Personal injury or property damage due to battery
explosion.

6

WHAT TO DO IN EMERGENCIES

403

«
...
401
402
403
404
405
...
»

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов