Chrysler Grand Caravan 2010 Скачать руководство пользователя страница 136

Страница: 136 / 506

To separate the table top from the pole, follow these
steps:

1. Locate the release latch on the underside of the table
top.

2. Pull horizontally on the latch to activate the release
from the pole.

3. While pulling on the latch, pull upward to remove the
table top from the pole.

NOTE:

The table top should be removed from the leg

prior to removing the leg from its mounting base.

4. Locate the release button on the pole. Press the release
button firmly to activate the release from the base.

5. While pressing the release button, twist the pole in a
counterclockwise rotation until it stops. Pull upward to
remove the pole from the base.

6. Place the pole on the underside of the table top and
secure with the hook and loop straps.

7. Once the pole and table top are secured, you may
place them in the floor storage bin in front of the second
row seats.

NOTE:

Always store the table and pole in the floor

storage bin when not in use.

Table Top Release

136

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание Grand Caravan 2010



























































































































































































































































































































































































































































































































Результаты поиска

Содержание Grand Caravan 2010

Отзывы:

Chrysler Grand Caravan 2010, Руководство пользователя, Страница: 136 / 506

Результаты поиска

Содержание Grand Caravan 2010

Отзывы: