Preliminary Check
2-7
11.
Limit:
The display shows the values for the voltage and current limits.
12.
ERR:
Some hardware or remote interface command errors are detected and the error has
not been cleared.
13.
OFF:
The power supply’s output is disabled.
Note
You can display the following condition after rebooting your power supply. To
show “OUTPUT OFF” on the display, you have to select 0 through the menu
operation of the path, Menu > SYSTEM >STYLE. To show “CV & CC Limit
Setting with lit annunciators, Limit and OFF” you have to select 1 through the
menu operation of the path, Menu > SYSTEM >STYLE. This setting doesn’t
support Master/Slave mode, and SEQ mode.
