General Information
1-5
Flexible Features:
Standard USB / GPIB (IEEE-488) Interfaces
SCPI Commands Compatible with the Keysight E3632A
Easy I/O Setup through the Front Panel
Easy Way to Complete Calibration
Powerful Voltage Integration Solution via Master-Slave Connection Up to 7 Devices (Max.
252V)
Powerful Current Integration Solution via Master-Slave Connection Up to 7 Devices (Max.
49A)
Compensative External Sense when Conducting Master-Slave Connection (for
62010L-36-7 only)
Operational Features:
Autoranging from 1mV to 36V / 1mV to 60V and from 1mA to 7A / 1mA to 6A
Constant Voltage (CV) or Constant Current (CC) Operation
Selective OVP and OCP Settings
Short Circuit Protection
Sixteen Storage Locations
External Sense for Load Voltage
Error Message Tips
Calibration via the Front Panel or Remote Interfaces
High Efficiency with A Durable Control Knob
The performance accuracy is subject to calibration accuracy.
1.2
Precautions
Please carefully read the manual before operating this device.
This manual is for reference only. Please consult your distributor for further assistance.
The contents of this manual may be amended by the manufacturer without notice.
Never dismantle the equipment or the equipment may be damaged.
This equipment must not be used in dangerous situations where damage may result.
This product should be placed in a safe area while not in use. The maximum weight
loading on the 62000L series case is 20Kgs. Exceeding this might cause the equipment to
malfunction.
1.3
Maintaining the 62000L Series
To clean the instrument, use a damp cloth or mild, water-based cleaner. Only clean the
exterior of the instrument. Do not apply cleaner directly to the instrument or allow liquids to
enter or spill on the instrument.
1.4
Product Users
This product is intended for use by qualified personnel who are cognizant of shock hazards
and familiar with the safety precautions required to avoid possible injury. Read and follow all
