Christini AWD 250, Руководство по обслуживанию

Страница: 17 / 124

Page 16
Cooling System
WARNING WARNING WARNING WARNING
If coolant gets on the tires will make them very slippery and can cause an accident.
- Visually inspect the old coolant. If whitish spots are observed in the liquid is a clear indication that the
aluminum parts in the cooling system are corroded. If the coolant is brown, iron or steel parts of the system
are rusting. In both cases, flush the cooling system.
- Check the cooling system for damage, leaks or missing gaskets in the cooling system.
- Install the water pump cover drain screw with the specified torque values shown in the table. Always re-
place the gasket with a new one.
Drain plug tightening torque (refer to torque table)
Drain plug tightening torque (refer to torque table) Drain plug tightening torque (refer to torque table)
Drain plug tightening torque (refer to torque table)
Water pump screw: 9 Nm
Water pump screw: 9 Nm Water pump screw: 9 Nm Water pump screw: 9 Nm
- Fill the radiator up to the edge of the cap with coolant, and install the radiator cap.
- Inspect the cooling system for leaks.
- Start and warm up the engine, then stop the engine.
- Check the coolant level after the engine cools down. Add coolant up to the cap.