Christini AWD 250, Руководство по обслуживанию

Страница: 16 / 124

Page 15
Coolant recommended Coolant recommended Coolant recommended Coolant recommended
Coolant absorbs excessive heat from the engine and transfers it to the air at the radiator. If the coolant
level is low, the engine overheats and may suffer severe damage. Check the coolant level each day
before riding the motorcycle. Add liquid recommended if the level is low (see next page).
WARNING WARNING WARNING WARNING
To prevent severe scalding do not remove the radiator cap or try to change liquid, when the engine is still
hot. Wait until it cools.
Coolant level
Coolant level Coolant level Coolant level
- Place the motorcycle in riding position.
- Turn the radiator cap counterclockwise and wait a few sec-
onds until vapors inside are released. Then push and turn it
further in the same direction and remove the cap.
NOTE NOTE NOTE NOTE
Check the level when the engine is cold.
Check the level when the engine is cold. Check the level when the engine is cold.
Check the level when the engine is cold.
- Check the coolant level. The coolant level should be just at a level below the cap rubber seal.
- If the coolant level is low, add the correct amount of coolant through the filler opening.
Total quantity
Total quantity Total quantity
Total quantity
Mix antifreeze and distilled water 1:1 (distilled water 50%, antifreeze 50%).
Capacity: 1.1 L
Coolant Replacement
Coolant Replacement Coolant Replacement Coolant Replacement
Coolant should be changed periodically to ensure long engine
life.
- Wait for the engine to cool completely.
- Place the motorcycle in riding position.
- Remove the radiator cap.
- Place a container under the coolant drain screw, and drain
the coolant from the radiator and engine by removing the drain
screw (B) at the bottom of the water pump cover (A). Wash off
immediately any coolant spilled on the chassis, engine, or
wheels.
Cooling System