Christie Solaria One, Руководство по обслуживанию

Страница: 50 / 88

3-22 Solaria One/Solaria One
+
Service Manual
020-101039-02 Rev. 1 (06-2013)
Section 3: Parts and Module Replacement
11. Attach the handle ( A ) included with the service assembly to the light engine ( B ).
12. Loosen the three captive screws securing the light engine to the light tube with a 3 mm hex key.
13. Remove the light engine from the projector.
14. Remove the 2 screws securing the douser bracket to the new light engine and then remove the douser.
15. Cover the light engine with an electro-static protective cover.
3.26 Replace the Douser Assembly
The douser is attached to the light engine prism. It can be removed on its own, or with the light engine.
1. Turn the lamp off and cool the projector for at least 15 minutes.
2. Turn the projector off and then disconnect it from AC power.
3. Remove the top lid. See
Remove the Top Lid on page 3-4 .
4. Remove the high security lid. See Remove the High Security and Light Engine Lid on page 3-5 .
5. Remove the 2 screws that secure the light engine cover ( A ).
6. Remove the light engine blower. See Remove the Light Engine Blower (Fan 4) on page 3-32.
7. Remove the 2 screws that secure the douser to the light engine.
8. Lift the douser on an angle up and out of the projector.
A
B
A