Christie Solaria One, Руководство по обслуживанию

Страница: 33 / 88

Section 3: Parts and Module Replacement
Solaria One/Solaria One
+
Service Manual 3-5
020-101039-02 Rev. 1 (06-2013)
3.6 Remove the Touch Panel Controller
1. Loosen the clamp holding the extension arm to the TPC ball joint.
2. Pull the TPC outward and away from the extension arm.
3. Disconnect the TPC harness.
4. Remove the 3 screws securing the ball mount to the projector and then remove the ball mount.
3.7 Remove the High Security and Light Engine Lid
1. Turn the lamp off and cool the projector for at least 15 minutes.
2. Turn the projector off and then disconnect it from AC power.
3. Remove the top lid. See
Remove the Top Lid on page 3-4 .
4. Unlock the high security ( A ) lid with the high security key.
5. Lift the lid up and out.
6. Remove the 2 screws securing the light engine lid to the center structure and then lift the lid up and out of
the projector.
A