![background image](http://html.mh-extra.com/html/christie/solaria-one/solaria-one_service-manual_2604069049.webp)
Section 3: Parts and Module Replacement
Solaria One/Solaria One
+
Service Manual
3-21
020-101039-02 Rev. 1 (06-2013)
6. Remove the 2 screws that secure the light engine cover (
A
).
7. Remove the light engine blower. See
Remove the Light Engine Blower (Fan 4) on page 3-32
8. Remove the light dump.
a. Disconnect the douser cable.
b. Loosen the captive screw securing the light dump and then lift the light dump up and out of the projec-
tor.
9. Disconnect the LVDS cables from the backplane:
a. Press both latches on the sides of the cable connector with equal pressure.
b. Pull the cable connector outward with even pressure. Do not use a twisting motion to disconnect the
cable connector.
Note:
When replacing the LVDS cables, the This Side Up label on the connector must face outward.
Twisting or pulling the connector with unequal pressure can permanently damage it
.
10. Remove the LVDS cables from the harness clips holding them to the center structure.
A
Содержание Solaria One
