Christie D13HD-HS, Руководство по обслуживанию

Страница: 102 / 112

Printed circuit boards and sensors
HS Series D13 Service Manual 102
020-000892-03 Rev. 1 (12-2019)
6. Remove the harnesses from the clips.
7. Starting from the front side, lift the main board gently to disconnect the J27 connector on the
bottom side of the main board.
M J29 L-FILTER DETECT Composed of red and black wires, a white connector,
and a black wire tube (two pin)
N J36 ZOOM/FOCUS Composed of blue, red, white, and yellow wires, a
white connector, and a black wire tube (four pin)
O J25 LIGHT SENSOR Composed of black, yellow, and red wires, a white
connector, and a black wire tube (six pin)
P J47 DRIVER BD B1 Composed of red and blue wires, a white connector,
and a blue wire tube (30 pin)
Q J46 DRIVER BD B2 Composed of red and blue wires, a white connector,
and a blue wire tube (30 pin)
R J48 DRIVER BD R Composed of red and black wires, a white connector,
and a red wire tube (30 pin)
S J30 R-FILTER DETECT Composed of red and black wires, a white connector,
and a black wire tube (two pin)
T J51 THERMAL-NON Composed of red, black, white, and blue wires, a
white connector, and a black wire tube (four pin)
U/V/W/X J70 FAN7, J68 FAN6,
J71 FAN5, J69 FAN4 Composed of black, blue, white, and blown wires, a
white connector, and a black wire tube (four pin)
Item Male connector on
connector board Description Figure