Christie D13HD-HS, Руководство по обслуживанию

Страница: 34 / 112

Service setups
HS Series D13 Service Manual 34
020-000892-03 Rev. 1 (12-2019)
Running a remote port performance test
To perform the remote port performance test, complete the following steps.
1. Connect the projector and remote controller using an audio cable.
2. On the IR remote, press Menu .
The image of on-screen display menu is projected.
Running a USB A port performance test
To perform the USB A port performance test, complete the following steps.
1. Connect a U disk to the projector over the USB A port.
2. Switch the signal source to Card reader .
The data of U disk is projected.
ID Part name Description
1 Test equipment Remote controller
2 Test signal None
3 Inspection item
Wired remote port performance test
4 Inspection distance 1.8 to 2.2 m
5 Criteria To confirm that it can power on/off the projector, on the remote controller,
press
ON .
ID Part name Description
1 Test equipment U disk
2 Test signal 64 Gray RGBW
3 Inspection item USB A port performance test
4 Inspection distance 1.8 to 2.2 m
5 Criteria No abnormal color performance, line distortion, or noise exist on the screen