Chore-Time Chore-Tronics 3 Control Скачать руководство пользователя страница 73

Страница: 73 / 142

Control Setup

Chore-Tronics® 3 Control

MT2398C

Programs/Setup Key Screens

Programs Screen/ Activate

1. Select the

Main menu

button.

Select the Programs

Button.

3. Select the

Programs

button.

4. In this screen you can choose from available

Programs

already programmed into the Con-

trol.

You then can choose an action for each program

as follows: Activate Program Settings, Delete
Program Settings, Save Program Settings, Yes-
terday's Settings. This is a very powerful screen
that allows the user to store up to 6 complete
setups of the Control that can be re-activated at
any time.

Select the Activate button

from the Programs / Setup Key screen.

The Programs / Activate screen will open.

Select the desired saved program

from the

drop down.

Select the OK button.

8. A window will open to ask you if you are sure

you want to continue and that all control set-
tings will be overwritten.

Select OK

to contin-

ue with the activation or Cancel to cancel the
activation of the program.

If OK is selected

the control will restart with

all the selected program settings.

Содержание Chore-Tronics 3 Control















































































































































Результаты поиска

Содержание Chore-Tronics 3 Control

Отзывы:

Chore-Time Chore-Tronics 3 Control, Инструкция по установке и эксплуатации, Страница: 73 / 142

Результаты поиска

Содержание Chore-Tronics 3 Control

Отзывы: