Chore-Time Chore-Tronics 3 Control Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 142

Chore-Time Chore-Tronics 3 Control Скачать руководство пользователя страница 5

General

General

Chore-Tronics® 3 Control

5

MT2398C

Technical Specifications140Technical Specifications139

Support Information

The Chore-Tronics

®

3 Controls are used to control the Climate in a structure to insure efficient growth of

Livestock. Using this equipment for any other purpose or in a way not within the operating recommendations
specified in this manual will void the warranty and may cause personal injury.

This manual is designed to provide comprehensive planning, installation, safety, operation, and parts listing
information. The Table of Contents provides a convenient overview of the information in this manual. The Table
of Contents also specifies which pages contain information for the sales personnel, installer, and consumer (end
user).

Safety Information

Caution, Warning and Danger Decals

have been placed on the equipment to warn

of potentially dangerous situations. Care should be taken to keep this information
intact and easy to read at all times. Replace missing or damaged safety decals
immediately.

Using the equipment for purposes other than specified in this manual may cause
personal injury and/or damage to the equipment.

Follow Safety Instructions

Carefully read all safety messages in this manual and on your equipment safety signs.
Follow recommended precautions and safe operating practices.

Keep safety signs in good condition. Replace missing or damaged safety signs.

Decal Descriptions

DANGER : Electrical Hazard

Disconnect electrical power before inspecting or servicing equipment unless
maintenance instructions specifically state otherwise.

Ground all electrical equipment for safety.

All electrical wiring must be done by a qualified electrician in accordance with local
and national electric codes.

Ground all non-current carrying metal parts to guard against electrical shock.

With the exception of motor overload protection, electrical disconnects and over
current protection are not supplied with the equipment.

«
...
3
4
5
6
7
...
»

Содержание Chore-Tronics 3 Control















































































































































Отзывы:

Нет отзывов