Chino EH3000 Series, Инструкция по эксплуатации

Страница: 43 / 96

－ 40 －
6. OPERATION/SETTING
6.2 Operation/Setting Change
(1) Operation/Setting Section
Open the front cover, and perform the following operations/settings.
1) List of Setting/Operation Items
Various setting/operation items and starting key operation conditions are listed below. Confirm the details of each explanation page
before actual operation/setting.
Category Setting/operation item
Key operation mode 1 Key operation mode 2
“ALARM” “CAL”: Off “ALARM” “CAL”: Intermittent blink *1
Setting
mode
Chart speed change Select by single press of “ ◄ ”/” ► ” X
Alarm setting Single press of “MODE” X
User indication adjustment
Simultaneous single press of
“MODE” + “ ◄ ”
X
Shift Programming
Simultaneous single press of
“MODE” + “ ► ”
X
Operation
mode
Pen replacement mode
(pen type) Simultaneous single press of
“ ◄ ” + “ENTRY”
Simultaneous single press of
“ ◄ ” + “ENTRY”
Chart paper lighting
brightness dimming Simultaneous single press of
“ ► ” + “ENTRY”
Simultaneous single press of
“ ► ” + “ENTRY”
Key operation mode
1
→ 2
3 sec. press of “ENTRY” X
Key operation mode
2
→ 1
X Single press of “MODE”
Status
operation
Pen marker operation X Single press of “ ◄ ”/” ► ”
* “X”: The condition of setting/operation disabled is indicated.
* Simultaneous single press: While the left key is pressed, the right key is pressed once (Simultaneous single press of two keys. Refer to
(2)
Key Operation Type mentioned later.).
*1: Intermittent blink: Blink of lighting (about 0.2 sec.)
→ Off (about 0.8 sec.) repeated.
Avoid simultaneous press of multiple keys other than specified
key operations, simultaneous operation for switches, and
simultaneous operation for a switch and key.
Otherwise, wrong operations or wrong behavior of the
instrument may occur.
Avoid Simultaneous Operations.
[Dot-printing type]
[Pen type]
State of Front Cover Opened