Chino EH3000 Series Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 96

background image

－

36

－

5. LOADING

5.3 Chart Loading



(5) Installing the Chart Cassette into the Inner Unit

Guide rails are located at the right and left of the inner unit.
Align the chart cassette to the guide rails and push it into the inner
unit until it clicks (The both inner unit lock levers are opened
outward.).
Now the chart paper loading completed.

(6) Chart Feed Check after Chart Loading

1. Turn the power on.
2. Press FEED key to check that the chart paper is sent smoothly.

When the FEED key is pressed continuously, the chart paper is
fed slowly for about 2 seconds, and when the key is pressed
further, the chart paper is fed fast (Refer to 6.3 Chart Feeding
Operation, (2) Chart Feeding).

3. If the chart paper is not fed smoothly, reload the chart paper.

Guide

Chart speed

Printing days

12.5 mm/H

About 65 days

25 mm/H

About 32 days

50 mm/H

About 16 days

The remaining amount of the chart paper is indicated with the
red number at the right side of the chart paper. When the
remaining is few, the red end mark and characters appear at
the right end of the chart paper.

Continuous Printing Days of Chart

Remaining Amount of Chart Paper

When the chart cassette is loaded, backlash of the chart feed
mechanism (allowance of mechanism) is generated.
Note that the chart paper is not fed for a period of time until this
backlash is removed.

•

Method to minimize the period of no feeding of the chart

paper by the chart cassette loading.

(1) After the chart cassette loading, put back the chart feed

gear lightly until it stops, and then the chart feed
mechanism backlash can be minimized.

(2) With the front FEED key operation, operate the FEED key

until the chart paper is fed, and then the time of no chart
feeding is almost none.

When Chart Cassette is Loaded

The chart cassette of this product has a flat surface in the front
which allows notes.

The structure of this product allows manual feeding of the chart
paper (Refer to 6.3 Chart Feeding Operation); therefore, if force
is added downward (feeding) on notes writing, the chart feed
mechanism moves down and the chart paper feeding may be
displaced.
Even if the chart feed mechanism for manual feeding does not
move, the chart paper may be displaced with the mechanism
backlash.
Pay attention to the chart paper not to be moved on writing.
When the chart paper is moved downward, time axis is
displaced, and the chart paper is not fed for the period
equivalent to the backlash of the chart feed mechanism.

Notes on Chart Paper

Note on Notes Writing

«
...
37
38
39
40
41
...
»

Содержание EH3000 Series

































































































Отзывы:

Нет отзывов

Похожие инструкции для EH3000 Series

Бренд: Olympus Страницы: 4

Бренд: Olympus Страницы: 260

Бренд: Altronics Страницы: 15

Бренд: Lawmate Страницы: 1

Бренд: Panasonic Страницы: 59

Micro-Speak Plus 4GB

Бренд: Talking Products Страницы: 5

Бренд: Olympus Страницы: 100

Бренд: Panasonic Страницы: 52

Diga DMR-ES15EBL

Бренд: Panasonic Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды