Chicago Pneumatic TR 630, Инструкция по безопасности и эксплуатации

Страница: 31 / 36

Weights
TR 850 TR 630
1,650 (3,638) 1,548 (3,413) Net weight, kg (lbs)
1,675 (3,693) 1,573 (3,468) Operating weight EN500, kg (lbs)
Radio equipment
Transmitter
Battery NiMh 1500 mAh. The transmitter can be operated without battery
via cable control.
Operating voltage
Up to 15 hours with a new battery. Operating time
Graphical, resolution 128 x 32. Data display
IP 66. Protection class
Between -25 (-13) and +85 (+185). Operating temperature, °C (°F)
Between -40 (-40) and +85 (+185). Storage temperature, °C (°F)
2 x NiMh batteries supplied with the machine. Battery
Receiver
Between 10 and 32 Operating voltage, V DC
100 mA, without external charging at 12 V DC. General consumption
CPU design 2 robust safety switches (max 2 A). Designed to fulfil EN
13849-1 PL e (EN951-1, Cat 4).
Processor
BlueTooth, 2.4 Operating frequency, GHz
Triple-colour LED, Red/Green/Yellow. Indication, receiver
Twin-colour LED Red/Green. Indication, CAN status
IP 67 Protection class
Between -25 (-13) and +85 (+185). Operating temperature, °C (°F)
Between -40 (-40) and +85 (+185). Storage temperature, °C (°F)
Noise and vibration declaration statement
Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11201, EN 500-4.
Vibration value determined according to EN 500-4. See table ”Noise and vibration data” for the values etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other machines tested in accordance
with the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Construction Tools EOOD, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This machine may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at
http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
31 9800 1262 01a | Original instructions
Safety and operating instructions TR 630, 850