To operate the machine when both of the contact
sensors are activated, press and hold the horn button
for more than 1 second. Hold the button while
operating with the joystick.
When taking a break
♦
Stop the machine during breaks.
♦
During all breaks you must put the transmitter
away so that there is no risk for unintentional start.
Parking
Always park the machine on level ground. Before
leaving it:
♦
Turn off the engine and the transmitter.
♦
Activate the parking brake.
♦
Store the transmitter securely to prevent
unauthorized start of the machine.
Maintenance
WARNING
Scalding hazard
During maintenance there is a risk of scalding from
hot engine oil.
►
Always ensure that the engine is cold before
performing any maintenance.
Regular maintenance is a basic requirement for the
continued safe and efficient use of the machine.
Follow the maintenance instructions carefully.
♦
Before starting maintenance on the machine,
clean it in order to avoid exposure to hazardous
substances. See “Dust and fume hazard”.
♦
Use only authorised parts. Any damage or
malfunction caused by the use of unauthorised
parts is not covered by warranty or product
liability.
♦
When cleaning mechanical parts with solvent,
comply with appropriate health and safety
regulations and ensure there is satisfactory
ventilation.
♦
For major service of the machine, contact the
nearest authorised workshop.
♦
After each service, check that the machine's
vibration level is normal. If not, contact the nearest
authorised workshop.
Battery charging
Use a voltage regulated battery charger (constant
voltage). A switched two-stage charger with constant
voltage is recommended. A two-stage charger
automatically reduces the charging voltage (14.4 V)
to trickle charging (13.3 V) when the battery is fully
charged.
Battery storage and trickle charging
Never leave a machine with a discharged battery. A
discharged battery freezes at a temperature of about
-7°C (19F). A fully charged battery will freeze at
-67°C (-89F). A battery that is not being used must
be fully charged before being put aside.
Trickle charging is not normally required during a
period of 6 to 8 months. If a battery has not been in
use for a long period, it must be fully charged before
being used. Trickle charging is recommended a
couple of times during the season (especially in
winter).
Desktop charger
WARNING
Explosion
If the battery is charged in a damp room at a high
temperature, it might explode.
►
Use charger only in a dry room within the
temperature range -25-70°C (-13-158°F).
♦
The desktop charger works within a voltage range
of100-240 V.
♦
The desktop charger comes with an adapter that
works in most sockets.
A steady yellow light indicates that the charger is
ready for charging. Place the battery in the charger.
The charger verifies the battery, which takes 10
seconds. If battery is accepted the charge starts. Full
charge time is 2.5 hours at a normal temperature.
The battery will not be damaged if it is left in the
charger when fully charged.
When the battery is removed from the charger, wait
until the LED indicator turns yellow before inserting
a new battery for charging.
23
9800 1262 01a | Original instructions
Safety and operating instructions
TR 630, 850
Содержание TR 630
Страница 1: ...Safety and operating instructions Trench compactor TR 630 850 www cp com ...
Страница 2: ...9800 1262 01a Original instructions 2 TR 630 850 ...
Страница 35: ...35 9800 1262 01a Original instructions TR 630 850 ...
Страница 36: ...2016 06 No 9800 1262 01a Copyright Construction Tools EOOD ...